Builders
Chain Operators
Tutorials
Creating Your Own L2 Rollup Testnet
Please do not rely on the content of this page as it is currently undergoing maintenance. Code samples and solutions may not function as expected. Please check back for an update or signup to help us revise this page. We welcome your contribution! ❤️

Creating Your Own L2 Rollup Testnet

Please be prepared to set aside approximately one hour to get everything running properly and make sure to read through the guide carefully. You don't want to miss any important steps that might cause issues down the line.

This tutorial is designed for developers who want to learn about the OP Stack by spinning up an OP Stack testnet chain. You'll walk through the full deployment process and teach you all of the components that make up the OP Stack, and you'll end up with your very own OP Stack testnet.

It's useful to understand what each of these components does before you start deploying your chain. To learn about the different components please read the deployment overview page.

You can use this testnet to experiment and perform tests, or you can choose to modify the chain to adapt it to your own needs. The OP Stack is free and open source software licensed entirely under the MIT license. You don't need permission from anyone to modify or deploy the stack in any configuration you want.

⚠️

Modifications to the OP Stack may prevent a chain from being able to benefit from aspects of the Optimism Superchain. Make sure to check out the Superchain Explainer to learn more.

Software Dependencies

DependencyVersionVersion Check Command
git (opens in a new tab)^2git --version
go (opens in a new tab)^1.21go version
node (opens in a new tab)^20node --version
pnpm (opens in a new tab)^8pnpm --version
foundry (opens in a new tab)^0.2.0forge --version
make (opens in a new tab)^3make --version
jq (opens in a new tab)^1.6jq --version
direnv (opens in a new tab)^2direnv --version

Notes on Specific Dependencies

node

We recommend using the latest LTS version of Node.js (currently v20). nvm (opens in a new tab) is a useful tool that can help you manage multiple versions of Node.js on your machine. You may experience unexpected errors on older versions of Node.js.

foundry

It's recommended to use the scripts in the monorepo's package.json for managing foundry to ensure you're always working with the correct version. This approach simplifies the installation, update, and version checking process. Make sure to clone the monorepo locally before proceeding.

direnv

Parts of this tutorial use direnv (opens in a new tab) as a way of loading environment variables from .envrc files into your shell. This means you won't have to manually export environment variables every time you want to use them. direnv only ever has access to files that you explicitly allow it to see.

After installing direnv (opens in a new tab), you will need to make sure that direnv is hooked into your shell (opens in a new tab). Make sure you've followed the guide on the direnv website (opens in a new tab), then close your terminal and reopen it so that the changes take effect (or source your config file if you know how to do that).

💡

Make sure that you have correctly hooked direnv into your shell by modifying your shell configuration file (like ~/.bashrc or ~/.zshrc). If you haven't edited a config file then you probably haven't configured direnv properly (and things might not work later).

Get Access to a Sepolia Node

You'll be deploying a OP Stack Rollup chain that uses a Layer 1 blockchain to host and order transaction data. The OP Stack Rollups were designed to use EVM Equivalent blockchains like Ethereum, OP Mainnet, or standard Ethereum testnets as their L1 chains.

This guide uses the Sepolia testnet as an L1 chain. We recommend that you also use Sepolia. You can also use other EVM-compatible blockchains, but you may run into unexpected errors. If you want to use an alternative network, make sure to carefully review each command and replace any Sepolia-specific values with the values for your network.

Since you're deploying your OP Stack chain to Sepolia, you'll need to have access to a Sepolia node. You can either use a node provider like Alchemy (opens in a new tab) (easier) or run your own Sepolia node (harder).

Build the Source Code

You're going to be spinning up your OP Stack chain directly from source code instead of using a container system like Docker (opens in a new tab). Although this adds a few extra steps, it means you'll have an easier time modifying the behavior of the stack if you'd like to do so. If you want a summary of the various components you'll be using, take another look at the What You're Going to Deploy section above.

💡

You're using the home directory ~/ as the work directory for this tutorial for simplicity. You can use any directory you'd like but using the home directory will allow you to copy/paste the commands in this guide. If you choose to use a different directory, make sure you're using the correct directory in the commands throughout this tutorial.

Build the Optimism Monorepo

Clone the Optimism Monorepo

cd ~
git clone https://github.com/ethereum-optimism/optimism.git

Enter the Optimism Monorepo

cd optimism

Check out the correct branch

💡

You will be using the tutorials/chain branch of the Optimism Monorepo to deploy an OP Stack testnet chain during this tutorial. This is a non-production branch that lags behind the develop branch. You should NEVER use the develop or tutorials/chain branches in production.

git checkout tutorials/chain

Check your dependencies

💡

Don't skip this step! Make sure you have all of the required dependencies installed before continuing.

Run the following script and double check that you have all of the required versions installed. If you don't have the correct versions installed, you may run into unexpected errors.

./packages/contracts-bedrock/scripts/getting-started/versions.sh

Install dependencies

pnpm install

Build the various packages inside of the Optimism Monorepo

make op-node op-batcher op-proposer
pnpm build

Build op-geth

Clone op-geth

cd ~
git clone https://github.com/ethereum-optimism/op-geth.git

Enter op-geth

cd op-geth

Build op-geth

make geth

Fill Out Environment Variables

You'll need to fill out a few environment variables before you can start deploying your chain.

Enter the Optimism Monorepo

cd ~/optimism

Duplicate the sample environment variable file

cp .envrc.example .envrc

Fill out the environment variable file

Open up the environment variable file and fill out the following variables:

Variable NameDescription
L1_RPC_URLURL for your L1 node (a Sepolia node in this case).
L1_RPC_KINDKind of L1 RPC you're connecting to, used to inform optimal transactions receipts fetching. Valid options: alchemy, quicknode, infura, parity, nethermind, debug_geth, erigon, basic, any.

Generate Addresses

You'll need four addresses and their private keys when setting up the chain:

  • The Admin address has the ability to upgrade contracts.
  • The Batcher address publishes Sequencer transaction data to L1.
  • The Proposer address publishes L2 transaction results (state roots) to L1.
  • The Sequencer address signs blocks on the p2p network.

Enter the Optimism Monorepo

cd ~/optimism

Generate new addresses

🚫

You should not use the wallets.sh tool for production deployments. If you are deploying an OP Stack based chain into production, you should likely be using a combination of hardware security modules and hardware wallets.

./packages/contracts-bedrock/scripts/getting-started/wallets.sh

Check the output

Make sure that you see output that looks something like the following:

Copy the following into your .envrc file:
  
# Admin address
export GS_ADMIN_ADDRESS=0x9625B9aF7C42b4Ab7f2C437dbc4ee749d52E19FC
export GS_ADMIN_PRIVATE_KEY=0xbb93a75f64c57c6f464fd259ea37c2d4694110df57b2e293db8226a502b30a34

# Batcher address
export GS_BATCHER_ADDRESS=0xa1AEF4C07AB21E39c37F05466b872094edcf9cB1
export GS_BATCHER_PRIVATE_KEY=0xe4d9cd91a3e53853b7ea0dad275efdb5173666720b1100866fb2d89757ca9c5a
  
# Proposer address
export GS_PROPOSER_ADDRESS=0x40E805e252D0Ee3D587b68736544dEfB419F351b
export GS_PROPOSER_PRIVATE_KEY=0x2d1f265683ebe37d960c67df03a378f79a7859038c6d634a61e40776d561f8a2
  
# Sequencer address
export GS_SEQUENCER_ADDRESS=0xC06566E8Ec6cF81B4B26376880dB620d83d50Dfb
export GS_SEQUENCER_PRIVATE_KEY=0x2a0290473f3838dbd083a5e17783e3cc33c905539c0121f9c76614dda8a38dca

Save the addresses

Copy the output from the previous step and paste it into your .envrc file as directed.

Fund the addresses

You will need to send ETH to the Admin, Proposer, and Batcher addresses. The exact amount of ETH required depends on the L1 network being used. You do not need to send any ETH to the Sequencer address as it does not send transactions.

It's recommended to fund the addresses with the following amounts when using Sepolia:

  • Admin — 0.5 Sepolia ETH
  • Proposer — 0.2 Sepolia ETH
  • Batcher — 0.1 Sepolia ETH

To get the required Sepolia ETH to fund the addresses, we recommend using the Superchain Faucet (opens in a new tab) together with Coinbase verification (opens in a new tab).

Load Environment variables

Now that you've filled out the environment variable file, you need to load those variables into your terminal.

Enter the Optimism Monorepo

cd ~/optimism

Load the variables with direnv

💡

You're about to use direnv to load environment variables from the .envrc file into your terminal. Make sure that you've installed direnv (opens in a new tab) and that you've properly hooked direnv into your shell.

Next you'll need to allow direnv to read this file and load the variables into your terminal using the following command.

direnv allow
💡

WARNING: direnv will unload itself whenever your .envrc file changes. You must rerun the following command every time you change the .envrc file.

Confirm that the variables were loaded

After running direnv allow you should see output that looks something like the following (the exact output will vary depending on the variables you've set, don't worry if it doesn't look exactly like this):

direnv: loading ~/optimism/.envrc                                                            
direnv: export +DEPLOYMENT_CONTEXT +ETHERSCAN_API_KEY +GS_ADMIN_ADDRESS +GS_ADMIN_PRIVATE_KEY +GS_BATCHER_ADDRESS +GS_BATCHER_PRIVATE_KEY +GS_PROPOSER_ADDRESS +GS_PROPOSER_PRIVATE_KEY +GS_SEQUENCER_ADDRESS +GS_SEQUENCER_PRIVATE_KEY +IMPL_SALT +L1_RPC_KIND +L1_RPC_URL +PRIVATE_KEY +TENDERLY_PROJECT +TENDERLY_USERNAME

If you don't see this output, you likely haven't properly configured direnv. Make sure you've configured direnv properly and run direnv allow again so that you see the desired output.

Configure your network

Once you've built both repositories, you'll need to head back to the Optimism Monorepo to set up the configuration file for your chain. Currently, chain configuration lives inside of the contracts-bedrock (opens in a new tab) package in the form of a JSON file.

Enter the Optimism Monorepo

cd ~/optimism

Move into the contracts-bedrock package

cd packages/contracts-bedrock

Generate the configuration file

Run the following script to generate the getting-started.json configuration file inside of the deploy-config directory.

./scripts/getting-started/config.sh

Review the configuration file (Optional)

If you'd like, you can review the configuration file that was just generated by opening up deploy-config/getting-started.json in your favorite text editor. It's recommended to keep this file as-is for now so you don't run into any unexpected errors.

Deploy the Create2 Factory (Optional)

If you're deploying an OP Stack chain to a network other than Sepolia, you may need to deploy a Create2 factory contract to the L1 chain. This factory contract is used to deploy OP Stack smart contracts in a deterministic fashion.

💡

This step is typically only necessary if you are deploying your OP Stack chain to custom L1 chain. If you are deploying your OP Stack chain to Sepolia, you can safely skip this step.

Check if the factory exists

The Create2 factory contract will be deployed at the address 0x4e59b44847b379578588920cA78FbF26c0B4956C. You can check if this contract has already been deployed to your L1 network with a block explorer or by running the following command:

cast codesize 0x4e59b44847b379578588920cA78FbF26c0B4956C --rpc-url $L1_RPC_URL

If the command returns 0 then the contract has not been deployed yet. If the command returns 69 then the contract has been deployed and you can safely skip this section.

Fund the factory deployer

You will need to send some ETH to the address that will be used to deploy the factory contract, 0x3fAB184622Dc19b6109349B94811493BF2a45362. This address can only be used to deploy the factory contract and will not be used for anything else. Send at least 1 ETH to this address on your L1 chain.

Deploy the factory

Using cast, deploy the factory contract to your L1 chain:

cast publish --rpc-url $L1_RPC_URL 0xf8a58085174876e800830186a08080b853604580600e600039806000f350fe7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe03601600081602082378035828234f58015156039578182fd5b8082525050506014600cf31ba02222222222222222222222222222222222222222222222222222222222222222a02222222222222222222222222222222222222222222222222222222222222222 

Wait for the transaction to be mined

Make sure that the transaction is included in a block on your L1 chain before continuing.

Verify that the factory was deployed

Run the code size check again to make sure that the factory was properly deployed:

cast codesize 0x4e59b44847b379578588920cA78FbF26c0B4956C --rpc-url $L1_RPC_URL

Deploy the L1 contracts

Once you've configured your network, it's time to deploy the L1 contracts necessary for the functionality of the chain.

Deploy the L1 contracts

forge script scripts/Deploy.s.sol:Deploy --private-key $GS_ADMIN_PRIVATE_KEY --broadcast --rpc-url $L1_RPC_URL --slow
💡

If you see a nondescript error that includes EvmError: Revert and Script failed then you likely need to change the IMPL_SALT environment variable. This variable determines the addresses of various smart contracts that are deployed via CREATE2 (opens in a new tab). If the same IMPL_SALT is used to deploy the same contracts twice, the second deployment will fail. You can generate a new IMPL_SALT by running direnv allow anywhere in the Optimism Monorepo.

Generate the L2 config files

Now that you've set up the L1 smart contracts you can automatically generate several configuration files that are used within the Consensus Client and the Execution Client.

You need to generate three important files:

  1. genesis.json includes the genesis state of the chain for the Execution Client.
  2. rollup.json includes configuration information for the Consensus Client.
  3. jwt.txt is a JSON Web Token (opens in a new tab) that allows the Consensus Client and the Execution Client to communicate securely (the same mechanism is used in Ethereum clients).

Navigate to the op-node package

cd ~/optimism/op-node

Create genesis files

Now you'll generate the genesis.json and rollup.json files within the op-node folder:

go run cmd/main.go genesis l2 \
  --deploy-config ../packages/contracts-bedrock/deploy-config/getting-started.json \
  --l1-deployments ../packages/contracts-bedrock/deployments/getting-started/.deploy \
  --outfile.l2 genesis.json \
  --outfile.rollup rollup.json \
  --l1-rpc $L1_RPC_URL

Create an authentication key

Next you'll create a JSON Web Token (opens in a new tab) that will be used to authenticate the Consensus Client and the Execution Client. This token is used to ensure that only the Consensus Client and the Execution Client can communicate with each other. You can generate a JWT with the following command:

openssl rand -hex 32 > jwt.txt

Copy genesis files into the op-geth directory

Finally, you'll need to copy the genesis.json file and jwt.txt file into op-geth so you can use it to initialize and run op-geth:

cp genesis.json ~/op-geth
cp jwt.txt ~/op-geth

Initialize op-geth

You're almost ready to run your chain! Now you just need to run a few commands to initialize op-geth. You're going to be running a Sequencer node, so you'll need to import the Sequencer private key that you generated earlier. This private key is what your Sequencer will use to sign new blocks.

Navigate to the op-geth directory

cd ~/op-geth

Create a data directory folder

mkdir datadir

Initialize op-geth

build/bin/geth init --datadir=datadir genesis.json

Start op-geth

Now you'll start op-geth, your Execution Client. Note that you won't start seeing any transactions until you start the Consensus Client in the next step.

Open up a new terminal

You'll need a terminal window to run op-geth in.

Navigate to the op-geth directory

cd ~/op-geth

Run op-geth

You're using --gcmode=archive to run op-geth here because this node will act as your Sequencer. It's useful to run the Sequencer in archive mode because the op-proposer requires access to the full state. Feel free to run other (non-Sequencer) nodes in full mode if you'd like to save disk space. Just make sure at least one other archive node exists and the op-proposer points to it.

It's important that you've already initialized the geth node at this point as per the previous section. Failure to do this will cause startup issues between op-geth and op-node.

./build/bin/geth \
  --datadir ./datadir \
  --http \
  --http.corsdomain="*" \
  --http.vhosts="*" \
  --http.addr=0.0.0.0 \
  --http.api=web3,debug,eth,txpool,net,engine \
  --ws \
  --ws.addr=0.0.0.0 \
  --ws.port=8546 \
  --ws.origins="*" \
  --ws.api=debug,eth,txpool,net,engine \
  --syncmode=full \
  --gcmode=archive \
  --nodiscover \
  --maxpeers=0 \
  --networkid=42069 \
  --authrpc.vhosts="*" \
  --authrpc.addr=0.0.0.0 \
  --authrpc.port=8551 \
  --authrpc.jwtsecret=./jwt.txt \
  --rollup.disabletxpoolgossip=true

Start op-node

Once you've got op-geth running you'll need to run op-node. Like Ethereum, the OP Stack has a Consensus Client (op-node) and an Execution Client (op-geth). The Consensus Client "drives" the Execution Client over the Engine API.

Open up a new terminal

You'll need a terminal window to run the op-node in.

Navigate to the op-node directory

cd ~/optimism/op-node

Run op-node

./bin/op-node \
  --l2=http://localhost:8551 \
  --l2.jwt-secret=./jwt.txt \
  --sequencer.enabled \
  --sequencer.l1-confs=5 \
  --verifier.l1-confs=4 \
  --rollup.config=./rollup.json \
  --rpc.addr=0.0.0.0 \
  --p2p.disable \
  --rpc.enable-admin \
  --p2p.sequencer.key=$GS_SEQUENCER_PRIVATE_KEY \
  --l1=$L1_RPC_URL \
  --l1.rpckind=$L1_RPC_KIND

Once you run this command, you should start seeing the op-node begin to sync L2 blocks from the L1 chain. Once the op-node has caught up to the tip of the L1 chain, it'll begin to send blocks to op-geth for execution. At that point, you'll start to see blocks being created inside of op-geth.

By default, your op-node will try to use a peer-to-peer to speed up the synchronization process. If you're using a chain ID that is also being used by others, like the default chain ID for this tutorial (42069), your op-node will receive blocks signed by other sequencers. These requests will fail and waste time and network resources. To avoid this, this tutorial starts with peer-to-peer synchronization disabled (--p2p.disable).

Once you have multiple nodes, you may want to enable peer-to-peer synchronization. You can add the following options to the op-node command to enable peer-to-peer synchronization with specific nodes:

  --p2p.static=<nodes> \
  --p2p.listen.ip=0.0.0.0 \
  --p2p.listen.tcp=9003 \
  --p2p.listen.udp=9003 \

You can alternatively also remove the --p2p.static option, but you may see failed requests from other chains using the same chain ID.

Start op-batcher

The op-batcher takes transactions from the Sequencer and publishes those transactions to L1. Once these Sequencer transactions are included in a finalized L1 block, they're officially part of the canonical chain. The op-batcher is critical!

It's best to give the Batcher address at least 1 Sepolia ETH to ensure that it can continue operating without running out of ETH for gas. Keep an eye on the balance of the Batcher address because it can expend ETH quickly if there are a lot of transactions to publish.

Open up a new terminal

You'll need a terminal window to run the op-batcher in.

Navigate to the op-batcher directory

cd ~/optimism/op-batcher

Run op-batcher

./bin/op-batcher \
  --l2-eth-rpc=http://localhost:8545 \
  --rollup-rpc=http://localhost:9545 \
  --poll-interval=1s \
  --sub-safety-margin=6 \
  --num-confirmations=1 \
  --safe-abort-nonce-too-low-count=3 \
  --resubmission-timeout=30s \
  --rpc.addr=0.0.0.0 \
  --rpc.port=8548 \
  --rpc.enable-admin \
  --max-channel-duration=25 \
  --l1-eth-rpc=$L1_RPC_URL \
  --private-key=$GS_BATCHER_PRIVATE_KEY

The --max-channel-duration=n setting tells the batcher to write all the data to L1 every n L1 blocks. When it is low, transactions are written to L1 frequently and other nodes can synchronize from L1 quickly. When it is high, transactions are written to L1 less frequently and the batcher spends less ETH. If you want to reduce costs, either set this value to 0 to disable it or increase it to a higher value.

Start op-proposer

Now start op-proposer, which proposes new state roots.

Open up a new terminal

You'll need a terminal window to run the op-proposer in.

Navigate to the op-proposer directory

cd ~/optimism/op-proposer

Run op-proposer

./bin/op-proposer \
  --poll-interval=12s \
  --rpc.port=8560 \
  --rollup-rpc=http://localhost:9545 \
  --l2oo-address=$(cat ../packages/contracts-bedrock/deployments/getting-started/.deploy | jq -r .L2OutputOracleProxy) \
  --private-key=$GS_PROPOSER_PRIVATE_KEY \
  --l1-eth-rpc=$L1_RPC_URL

Connect Your Wallet to Your Chain

You now have a fully functioning OP Stack Rollup with a Sequencer node running on http://localhost:8545. You can connect your wallet to this chain the same way you'd connect your wallet to any other EVM chain. If you need an easy way to connect to your chain, just click here (opens in a new tab).

Get ETH On Your Chain

Once you've connected your wallet, you'll probably notice that you don't have any ETH to pay for gas on your chain. The easiest way to deposit Sepolia ETH into your chain is to send ETH directly to the L1StandardBridge contract.

Navigate to the contracts-bedrock directory

cd ~/optimism/packages/contracts-bedrock

Get the address of the L1StandardBridgeProxy contract

cat deployments/getting-started/.deploy | jq -r .L1StandardBridgeProxy

Send some Sepolia ETH to the L1StandardBridgeProxy contract

Grab the L1 bridge proxy contract address and, using the wallet that you want to have ETH on your Rollup, send that address a small amount of ETH on Sepolia (0.1 or less is fine). This will trigger a deposit that will mint ETH into your wallet on L2. It may take up to 5 minutes for that ETH to appear in your wallet on L2.

See Your Rollup in Action

You can interact with your Rollup the same way you'd interact with any other EVM chain. Send some transactions, deploy some contracts, and see what happens!

Next Steps